Tools Slider

|  HOME  > PRODUCTS  > TOOLS

 

Tools

Tools from PG Flowteknik

As we sell products of very high quality we also wants to provide the right tools these products deserve.

According to Hy-Lok´s installation manual (which you can find here) Tubing and fittings needs preparation to ensure that you will get a leak free connection. This has to be done with the right tools which we of cause have in our product range.

Tube cutter

Our tube cutter has 2 or more wheels to minimize friction while cutting the tube.

The tube cutter has a big hand wheel that makes it easy to cut though small and big stainless steel tubing. The cutter wheel is very easy to change as it mounted with a ball locking mecanism without any need for tools

Deburring tool

It is important to debure the tubing after cutting or sawing the tube.

As you cut the tube there can be small burs left which in many cases are crucial not to get inside a system. Our deburring tool can take the burs away from both the inside as well as the outside of the tube ends.

Tube bender

Tuber bender with wheels that ensures the perfect bend and do not leave scratches to weaken the tubing.

I addition the wheels helps a lot in how much force that has to be used in a bend, making it much easyer to do it precise. The bender can bend the tubing in 180 degrees without the handles crossing. Easy adjusting of the handle gives 90 degrees more bend in the same motion.

Inspection Gauge

Gap Inspection helps the operator or inspector to check if the fitting has been turned exactly 1 ¼ turns

Due to the fact that Hy-Lok fittings are made to very low tolerances it is possible to measure if the fitting has been pulled up correctly.

Preswaging tool

Hy-Lok is proud to offer a proprietary manual presetting tool.

Our manual presetting tool allows quick and easy presetting of the ferrules to the tube for sizes 1/8″ O.D. – 1″ O.D. This tool mounts easily into a vise and allow the installer to preset the ferrules by hand tightening with the appropriate size wrench.

Preswaging tool Ezymat I

Pre-Assembly of Hy-Lok tube fittings and Bite type fittings

Reliable ferrule pre-sets to tubing. Safe and reproducible assembly.

Assembly ability: Max O.D 1 in.(25 mm)
Hand pump: 10000 psi (700 barg), 2 speed
Weight: 6 Kg

Preswaging tool Ezymat II

One basic Auto pre-swaging machine for all size.

Provides versatility and value by covering size from 1/2″ through 2″ and 12 mm through 50 mm.

  • Hydraulic pump: 0.35 kW-2.0 l/min
  • Operating pressure: 0~600 bar
  • 220 V version: 220 V/1~/50/60/ Hz/2.5 A
  • Dimension: 400x400x230 mm
  • Weight : 30 Kg

Our Products

Product Carousel